Shandong Zhongren New Material Technology Co.,LTD Company News

Thermoplastic road marking paint plays a critical role in modern traffic safety systems. Known for its durability, high reflectivity, and fast-drying properties, it is widely used on highways, urban roads, pedestrian zones, and parking areas.   Key Ingredients and Their Functions   Resin – The main binder that gives the paint its structural strength. Common options include alkyd and hydrocarbon resins. Pigments – Provide color. White and yellow are the most widely used, while red and green are used in specific zones. Fillers – Materials like calcium carbonate and titanium dioxide improve opacity and reduce overall cost. Glass Beads – Microscopic reflective beads that enhance nighttime visibility under headlights. Plasticizers – Improve flexibility and adhesion to the pavement surface, especially in high-traffic or hot climates. Curing Agents – Ensure the paint dries and hardens quickly after application. Optional Additives – These may include anti-skid particles, UV stabilizers, and moisture-proofing agents, depending on project requirements. Zhongren offers customized thermoplastic paint formulations for a wide range of environments and project needs: High-reflectivity paint for foggy or low-light regions Anti-skid versions for slopes and intersections Quick-dry types for high-traffic urban roads Our products meet stringent quality and performance standards such as BS3262 and JT T288-2022. We offer environmentally friendly coatings that meet industry standards for low VOC (volatile organic compounds) and environmentally friendly formulations. We also provide OEM services, technical support, and full export documentation to serve customers worldwide. For more information, please feel free to contact our company!

Core Advantages of Electric Airless Sprayers 1. High Efficiency: Fast spraying speed (5-10 times faster than traditional brushes), covering a large area in a single spray stroke, making them suitable for large-scale applications. 2. Excellent Coating Quality: Excellent atomization results in strong and uniform paint adhesion, eliminating brush marks and bubbles, and resulting in a smoother, flatter finish. 3. Wide Applicability: Suitable for spraying high-viscosity paints (such as latex paint, anti-corrosion paint, wood finish, and waterproofing), eliminating the need for excessive dilution and reducing paint waste. 4. Wide Range of Application: Equipped with a long spray gun and high-pressure hose, these sprayers can be used over long distances and at high altitudes, eliminating the need for frequent equipment movement. 5. Material-Efficient and Environmentally Friendly: Paint utilization rates exceed 90% (compared to approximately 60% for traditional brush applications), reducing paint waste and environmental pollution. Main Applications - Building Decoration: Spraying interior and exterior wall latex paint, waterproof coatings, and fire retardant coatings. - Industrial Corrosion Protection: Spraying anti-corrosion and anti-rust paints on steel structures, pipelines, and storage tanks. - Woodworking: Spraying primers and topcoats on furniture, doors, and wood floors. - Vehicle and Marine: Spraying surface and protective coatings on automobiles, agricultural machinery, and ships. - Other Applications: Painting billboards, containers, and machinery and equipment casings.  

ZHONGREN is often a superior choice than thermoplastic for road marking. Here are some comparison factors to consider when selecting road marking solutions:   1. Bonding. ZHONGREN lasts longer because it forms a strong bond with the surface, even concrete, through chemical curing. Thermoplastic is heated before application and can be softened on hot surfaces, leading to tracking from tires.   2. Cracking/blemishes. ZHONGREN remains clean after application when bead embedment is correct, while thermoplastic pavement markings require flawless pavement and still tend to blemish quickly.   3.Longevity. ZHONGREN paint lasts as much as five years longer than most thermoplastic road marking solutions.   4.Safety. Thermoplastic powders require heating to ranges between 400-450 °F before applying to liquify the powder, risking burns to personnel. ZHONGREN is ready for cold application, making the marking system safer.   5.Priming. When applying thermoplastic to concrete, the surface requires priming. ZHONGREN allows for direct application to concrete and asphalt surfaces with minimal preparation.   6.Color variety. Thermoplastic paints have limited color options, while ZHONGREN road marking paints have a broader range of custom colors are available.   7. Application temperatures. ZHONGREN has a range of options when it comes to catalyst concentrations. The mixture is adjustable to increase or decrease the cure speed in combinations. Ratios of 1:1, 98:2, 4:1 are common combinations of ZHONGREN. These mixing ratios allow ZHONGREN to be applied quickly in hot and cold temperatures, and even freezing conditions. Thermoplastic paint cannot be applied in freezing temperatures. For more information, please feel free to contact our company!

  1. Durability Zhongren thermoplastic paint is specifically engineered to withstand the harsh conditions of the open road, including heavy vehicular traffic, extreme weather conditions, and UV radiation. This longevity ensures that road markings remain visible and effective for an extended period, reducing maintenance costs and improving road safety.   2. High Reflectivity Visibility is essential for road safety, especially during adverse weather conditions and at night. Zhongren thermoplastic road marking paint is designed with high reflectivity in mind. Its reflective glass beads are embedded within the paint, allowing road markings to shine brightly when illuminated by headlights. This reflective property enhances visibility, reduces accidents, and increases overall road safety.   3. Quick Drying Time Zhongren thermoplastic paint once applied and heated, the paint cools and solidifies rapidly, enabling traffic to resume its normal flow in a shorter timeframe compared to other marking materials. This reduced downtime minimizes traffic disruptions, making it an ideal choice for busy roadways.   4. Resistance to Fading Zhongren thermoplastic road marking paint exhibits excellent resistance to fading, ensuring that road markings remain vibrant and easily visible for an extended period. This resistance to fading helps maintain road safety by reducing the need for frequent repaints.   5. Adherence to Various Surfaces Zhongren thermoplastic road marking paint adheres well to a wide range of road surfaces, including asphalt and concrete, as well as surfaces with various textures and conditions. The durability, high reflectivity, fast drying, colorfastness and surface adaptability of Zhongren thermoplastic road marking paint ensure that every road can withstand the test of time and traffic. Choose us to contribute to a more sustainable and efficient transportation infrastructure. For more information, please feel free to contact our company!

Zhongren Coatings offers a wide range of marine coatings for metal ships and barges. We provide coatings for the harshest water environments to protect the metal hulls of vessels and offshore structures exposed to water. Our marine professional coatings can provide moisture-proof protective layers and prevent destructive rusting and corrosion of metals. Marine enamel semi-gloss and matte finishes contain anti-corrosion pigments to provide additional protection. Semi-gloss and matte finishes can be directly applied to low-carbon steel, but we always recommend using a primer first to ensure the longest service life of our coatings. Our advantages: 1.Outstanding corrosion resistance: Zhongren marine coatings use a two-component epoxy system to form a protective barrier, preventing rust and deterioration of the ship's structure, hull and components. It reduces the efficiency of hull corrosion. 2. Efficient anti-fouling performance: Zhongren anti-fouling paint contains anti-fouling additives, which can effectively inhibit the attachment of barnacles, algae and mollusks, reducing resistance and improving fuel efficiency. 3. Tough and wear-resistant: Zhongren marine coatings have high wear resistance and can withstand wear caused by continuous contact, maintaining the integrity of the hull. 4. UV protection: Zhongren provides UV-resistant marine coatings that prevent fading and loss of gloss due to prolonged exposure to sunlight, ensuring long-term color retention and luster. 5. Environmental performance: Zhongren offers environmentally friendly coatings that comply with low VOC (volatile organic compounds) and environmental protection formula industry standards, reducing harm to the environment and human health. From anti-fouling and anti-corrosion to wear-resistant and environmentally friendly, Zhongren Marine Ship Paint is not only your top-quality product choice but also your peace of mind during long voyages. Moreover, our company has also developed a special anti-slip coating. It features long-lasting high anti-slip performance, long-lasting wear resistance, rust prevention, corrosion resistance, impact resistance and compression resistance, rich colors, flexible application, and easy maintenance. Especially on surfaces with water, oil, or even ice, it can achieve excellent anti-slip effects. It is mainly applicable to anti-slip of ship decks, anti-slip of helicopter landing platforms on ships, and anti-slip of cabin floors, etc. For more information, please feel free to contact our company!

In floor decoration, the choice of floor paint directly affects the durability, aesthetics and user experience of the floor. Whether it is a home garage, factory workshop or commercial premises, choosing the right floor paint can make the floor"last long and remain in good condition". 一、When choosing floor paint, it is essential first understand the supporting system: Primer,intermediate coat and topcoat. 1. The function of the primer: It has strong penetration ability and can penetrate into the fine pores of the substrate surface, forming a tight bond and enhancing the adhesion between the topcoat and the substrate. 2. The function of the intermediate coat: It levels the surface, repairs cracks, increases hardness and thickness, and achieves the function of extending the service life. 3. The topcoat: The choice of topcoat depends on its function. If the ground hardness is above C20, the surface is smooth and complete, the intermediate coat can be omitted, but the primer and topcoat must be applied.   二、 The choice of topcoat is divided according to the function: 1. Indoor: If the anti-slip and anti-corrosion functions are not considered, solvent-free epoxy flat coating or solvent-free epoxy self-leveling flat paint is recommended (these two are more commonly used in the home and convenient for construction) 2. If the anti-slip function is considered, the topcoat should be granular and have certain anti-slip functions, such as solvent-free micro beads super wear-resistant, solvent-free epoxy colored sand self-leveling, solvent-free orange grain super wear-resistant and other materials. 3. Hospitals, schools, electronics factories: Considering the environment with strict requirements such as waterproofing, anti-corrosion, acid and alkali resistance, anti-static, and fire prevention, water-based polyurethane mortar self-leveling, polyurethane flat coating, polyurea anti-corrosion, etc. can be considered. 4. Laboratories with machinery and equipment need to consider static electricity and conductivity, and special topcoat self-leveling is required: water-based polyurethane mortar self-leveling, water-based polyurethane anti-static self-leveling, solvent-free epoxy self-leveling, and solvent-free epoxy colored sand self-leveling.   Zhongren offers coatings that meet industry standards for low VOC (volatile organic compounds) and environmentally friendly formulations, including acrylic, epoxy, polyurethane and latex paints for a variety of applications from residential to industrial. A comprehensive color palette and custom color matching services are available to meet your specific color requirements. For more information, please feel free to contact our company!

  As an important equipment in the fields of industrial coating, building decoration, etc., the stable operation of high-pressure airless sprayer directly affects the construction efficiency and coating quality. Doing a good job of daily maintenance can not only reduce the frequency of failures, but also extend the service life of the equipment and reduce the overall cost. The following are the core maintenance points of high-pressure airless sprayer.   I. After each use: clean in time to avoid residual blockage 1. Thoroughly clean the paint channel After stopping, immediately rinse the spray gun, nozzle, high-pressure pipe and pump body with the corresponding solvent (such as clean water, thinner). For oil-based paint, it is necessary to use a special thinner for circulation cleaning; water-based paint can be rinsed with clean water to ensure that there is no residual solidification of paint to prevent clogging of the nozzle or damage to the pump body seal during the next use. 2. Check the status of key components Disassemble the nozzle to check for wear or blockage. If the nozzle aperture is found to be larger and the atomization is uneven, it needs to be replaced in time; check whether the high-pressure pipe has bulges, cracks, and whether the connection is loose to avoid safety hazards caused by high-pressure leakage.   II. Regular in-depth maintenance: pay attention to the loss of core components 1. Pump body and seal maintenance Every 50-100 hours of use, check the plunger rod, seal ring and other vulnerable parts in the pump body. If the plunger rod is scratched and the seal ring is aged and cracked, it needs to be replaced in time, otherwise it may cause pressure drop, leakage and other problems. 2. Lubrication system maintenance According to the equipment manual, regularly add special lubricating oil to the pump body bearings and transmission parts to ensure smooth operation and reduce mechanical wear. Be careful to avoid using inferior lubricating oil to prevent oil pollution from contaminating the paint or clogging the oil circuit. 3. Filter cleaning and replacement The filters at the feed inlet and spray gun need to be checked weekly, and impurities should be cleaned or the filter screen should be replaced in time. Filter blockage will lead to insufficient feed, unstable pressure, affect the spraying effect, and even increase the load on the pump body.   III. Long-term storage: Take good protection to avoid equipment aging 1. Thoroughly empty and dry If the equipment is not used for a long time, the paint and solvent in the equipment must be completely emptied, and the pump body and pipeline must be rinsed with clean water or rust inhibitor to prevent internal rust. After cleaning, run it without load for 1-2 minutes to drain the residual liquid and ensure that the inside is dry. 2. Component disassembly and storage Disassemble the spray gun, nozzle, high-pressure pipe and other removable parts, clean them separately and put them in a dry and ventilated tool box to avoid direct sunlight or humid environment. Anti-rust oil can be applied to the surface of the pump body and covered with dustproof cloth to reduce dust adhesion. 3. Regular power-on inspection During storage, power on and run once every 1-2 months to allow the pump body and motor to run for a short time to prevent the parts from getting stuck or aging due to long-term static.   The core of high-pressure airless sprayer maintenance lies in "timely cleaning, regular inspection, and replacement as needed". Doing these details well can not only ensure the high efficiency and stability of the equipment every time it is used, but also reduce maintenance costs in the long run. If abnormal noise, sudden pressure drop, etc. are found during maintenance, it is recommended to contact professional maintenance personnel in time to avoid the expansion of small faults.

In the fields of industrial production and architectural decoration, spraying operation is a crucial link, and its quality and efficiency directly affect the quality of the final product and the progress of the project. In recent years, the plunger electric sprayer has stood out from many spraying equipment with its unique performance and has become the focus of industry attention. Working principle of Zhongren plunger electric sprayer The core component of the plunger electric sprayer is the plunger pump. The operation of the motor drives the eccentric wheel to make the plunger do reciprocating linear motion in the pump body. When the plunger goes up, the volume of the pump body increases and the pressure decreases, forming a negative pressure. At this time, the suction valve opens, and the paint is sucked into the pump body under the action of atmospheric pressure; when the plunger goes down, the volume of the pump body decreases, the pressure increases, the discharge valve opens, and the paint is squeezed out of the pump body and transported to the spray gun through a high-pressure hose. At the nozzle, the high-pressure paint rubs violently with the air, and is instantly atomized and evenly sprayed on the surface of the object to complete the spraying operation. Significant features 1. Stable pressure: The plunger pump can provide continuous and stable high pressure to ensure uniform spraying of the paint, avoiding problems such as uneven spraying and sagging. It is particularly suitable for projects with strict requirements on coating thickness and uniformity, such as automobile and ship coating. 2. Wide range of applicable coatings: It can easily cope with high-viscosity coatings, such as epoxy resin paint, polyurethane paint, etc. By adjusting the pressure and flow, the spraying requirements of different coatings can be met, expanding the scope of application. 3. High spraying efficiency: Compared with traditional spraying methods, the plunger sprayer has a fast spraying speed and a large spraying area per unit time, which can greatly shorten the construction cycle and improve work efficiency. It has obvious advantages in large-area coating projects. Advantages: 1. Improve coating quality: Stable pressure and precise flow control make the paint adhere evenly, and the formed coating is flat, smooth and dense, which effectively enhances the adhesion and durability of the coating and extends the service life of the coated object. 2. Cost saving: On the one hand, it reduces paint waste, and high-pressure airless spraying reduces overspray and splashing; on the other hand, high efficiency shortens construction time and reduces labor costs. Long-term use can save a lot of expenses for enterprises. 3. Convenient operation and maintenance: The operation is simple, and operators can master it after simple training; the structure is relatively simple, the main components are easy to disassemble and replace, and the maintenance is easy, which reduces equipment downtime and ensures production continuity. Whether it is industrial manufacturing or building decoration, it can provide users with efficient and high-quality spraying solutions. With the continuous advancement and innovation of technology, it is believed that plunger sprayers will play a greater role in the future coating field and help the industry reach new heights.  

Fatherly love is supreme, great and glorious. Fight against the years, fight against time, hope that time will be gentle, and every father can grow old slowly. Wish every father a happy Father's Day! With the warmest wishes!

When compared to spraying with compressed air, what is airless spray painting? To put it simply, Airless spray painting just uses material pressure without the air. An electric or pneumatical pump or petrol engine places the material under pressure and forces a defined amount of material at a maximum pressure of 250 bar through a tip bore. This transforms the material into a spray.   Airless spraying is the fastest way to complete most painting jobs. Learning how to use a paint sprayer is quite easy, but like anything new, practice and a little knowledge will help you achieve professional-quality results in no time.   Follow Important Safety Precautions Whenever operating any equipment, take proper safety precautions. Be mindful of potential hazards, wear protective clothing and eyewear, and stay alert. Proper Sprayer Setup While the specific steps for preparing your sprayer for use will be different depending on the model of sprayer you own and whether or not you have used your sprayer before, the basic steps include: Connecting the spray gun and hose Flushing and priming the sprayer Installing the tip and guard   Proper Surface Prep Preparing the surface you’ll be spraying is the most important part of any painting project. For exteriors, use a pressure washer and a cleaning solution to thoroughly clean the surfaces and allow to dry. Once clean and dry, repair any cracks, chips, and holes, and sand any rough areas. With any airless project, expect a certain amount of overspray. To protect surfaces from overspray, spend a few minutes preparing the surroundings. Cover all baseboards and protect any furniture, shutters, or windows. When painting outdoors, take careful note of wind directions, and cover any plants or shrubs with plastic to protect them from overspray.   Proper Spray Technique For even paint distribution and quality results, follow these basic spray techniques: Keep spray gun about 12 inches from the surface For best coverage, use a long, continuous motion—start your motion before triggering gun and continue your motion after the gun trigger is released Overlap your spray pattern by about 50%—simply aim the tip of the spray gun on your next pass at the edge of the previous painted area   Sprayers & Accessories Using the right spray tip can make your project easier. Use our Tip Selector tool to ensure your spray tip matches the job. Whether it is a Pressure Roller Kit or Tip Extension to get the job done faster or Pump Armor to keep your sprayer operating at top form.

The integration of technology with road infrastructure is taking a significant step forward with the introduction of smart road marking paint. This innovative paint incorporates sensors and communication technology, allowing it to interact with intelligent transportation systems (ITS).   The smart paint can provide real-time data on traffic conditions, road usage, and weather patterns. This information can be used to optimize traffic flow, improve safety, and reduce congestion. Additionally, the paint can change color or pattern in response to specific conditions, such as wet weather or heavy traffic, providing drivers with immediate and relevant information. The development of smart road marking paint represents a paradigm shift in road infrastructure management. With its ability to connect with ITS and provide real-time data, the paint is poised to revolutionize transportation and enhance the overall driving experience. Industry stakeholders are closely monitoring the development of this technology, anticipating its potential to transform the road marking industry.

As sustainability becomes a top priority for industries worldwide, the road marking paint sector is not immune to this trend. A new eco-friendly road marking paint has recently garnered significant attention for its environmental benefits and performance. The paint, which is made from biodegradable materials, significantly reduces the environmental footprint of road marking operations. It emits lower volatile organic compounds (VOCs) during application, making it a safer choice for workers and the environment. Additionally, the paint's durability ensures that it lasts longer, reducing the frequency of reapplications and the associated waste. Industry experts praise the new paint for its ability to balance performance and sustainability. With increasing pressure to adopt greener practices, the eco-friendly road marking paint is expected to become a key player in the market, driving innovation and change in the industry.